Chassis

8 Lug Hub 0n 6-1/2" Bolt Circle (48 Spartan)

Good used hub salvaged from 1948 Spartan trailer.  This is a very rare hub that Spartan on used for one year on 1948 Mansion models.    Hub includes #1779 outer bearing with race, #2788 inner bearing with race, grease seal, axle nut,...

Dexter 12" Left Hand 6000# Brake Assembly

This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs

Dexter 12" Right Hand 6000# Brake Assembly

This is slightly used and priced less than half of what new ones would sell for. Specs: Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs

6 Lug Hub 0n 5-1/2" Bolt Circle (G)

Good used hub salvaged from 1950 Spartan trailer.  This same hub was used on a lot of vintage trailers in the 1950's which had 6 lugs.  It has surface rust on the exterior but the inner surfaces are still in good shape.  Hub includes #1779...

15" X 5" STEEL WHEELS (6 lugs on 5-1/2" bolt circle)

HOLD TIM T. 5/6/24 These used wheels for vintage campers are 15" x 5" with 6 lugs on 5-1/2" bolt circle.  They have a positive offset and have the 3 tabs for holding a hub cap on. 

Screw on Grease Cap for 12" hub - cracked

This is a used screw on grease cap for vintage 12" hubs, both 5 lug and 6 lug.  The outside diameter is 2-7/8" and it is 1-3/4" tall.  It has surface rust or paint but is still in good usable shape. These grease caps were used on Spartan,...

Screw on Grease Cap for 12" hub

Hold Nelson. This is a used screw on grease cap for vintage 12" hubs, both 5 lug and 6 lug.  The outside diameter is 2-7/8" and it is 1-3/4" tall. The inside diameter is approximately 2-5/8".  It has surface rust or paint but is still in good...

Spring for Donut Magnet for 12" Warner Brakes

This is the spring that connects from the sides of the 8-1/4" donut magnet to the brake backing plate on a Warner 12" brake.  There are 2 springs used per magnet but this part # is only 1 spring. This spring measures approximately 1-1/8" long x...

Spring for Brake Shoes on Warner 12" Brakes

This is the spring that connects at the bottom of the continuous brake band with shoes on a Warner 12" brake.  There are 2 springs used per shoe but this part # is only 1 spring. This spring has swivel hooks on each end and measures approximately...

Brake Band with Shoes for 12" Warner Brakes

This is the Warner brand 12" continuous brake band with pads that was used on many trailer from the early 1950's.  The actual measurement on this is 11-3/4" diameter x 1-3/4" wide.  This is a used part salvaged from an old trailer so it will...

Warner Brake Magnet for 12" x 2" Hub (4.75" ID)

I believe Warner brand brakes were the best ever made.  The design was simple and effective.  These magnets were used on many trailers from the early 1950's.  This magnet was designed for 6 volt systems but work fine with current 12 volt...

Warner Brake Magnet for 12" x 2" Hub

I believe Warner brand brakes were the best ever made.  The design was simple and effective.  These magnets were used on many trailers from the early 1950's.  This magnet was designed for 6 volt systems but work fine with current 12 volt...